产品导航
产品搜索
输入产品关键字开始搜索
产品信息
直线驱动电机空心轴-SKT系列 详细信息
更新时间:2014/4/25 15:26:41 点击:350
产品简介
The motor bearings are designed for high axial forces up to 570 kN. SPINDASYN motors are very dynamic and feature high rigidity and zero backlash. SPINDASYN motors are available in convection-cooled and liquid-cooled versions.
详细资料
SPINDASYN motors are hollow-shaft motors and enable direct mounting of a wide range of ball or planetary roller screws. They contain all the components required for linear actuators, such as a servo motor, DIN mounting for ball screw, optional holding brake, and position encoder.
The motor bearings are designed for high axial forces up to 570 kN. SPINDASYN motors are very dynamic and feature high rigidity and zero backlash. SPINDASYN motors are available in convection-cooled and liquid-cooled versions.
The SPINDASYN SKT hollow shaft motors are compact mechatronic functional units consisting of a powerful servo motor with integrated thrust bearing and multi-turn absolute encoder. They have a modular design.
The SKT linear servo motor combines with a screw and nut system to form a ready-to-use linear drive. SPINDASYN hollow shaft motors are the more efficient alternative to pneumatic or hydraulic drives when high loads must be moved at different speeds, e.g., in (electric) presses.
功能和应用程序
Anti-twist protection
In linear movements, the motor torque is applied to the screw in the opposite direction. This torque has to be braced by a linear guidance.
Companion structure
Radial loads or overturning torques reduce the life of the screw-nut systems. With the companion structure, make sure that the motor and screw-nut system are flush with each other and that no radial forces are present.
Screw-nut system
SKT motors are suitable for screw-nut systems such as roller or ball screws. As a rule of thumb, roller screws can support larger forces with smaller diameters while ball screws offer better dynamic performance and are more cost-effective.
产品优势
Flexibility via modular concept
The modular design of SPINDASYN linear drives with respect to performance, screw diameter and axial force allows them to be specifically adapted to various applications. There is the choice from models with hollow through-shafts or blind hollow shafts, so that there is the option of limiting the strokes or not.
Energy efficiency
Compared to hydraulic systems and linear direct drives, SPINDASYN offers significantly higher efficiencies. Thus the customer achieves a better overall energy efficiency.
Extremely compact design
Since SPINDASYN includes an integrated screw, an entire linear drive with minimal dimensions can be designed. All of the functional elements such as the servo motor, bearing, DIN fitting for screw nuts, holding brake and encoder system are concentrated together as a compact unit within a single enclosure.
High stiffness
The integrated bearing eliminates the need for shaft couplings and significantly reduces the number of bearing points required. With the stiffness enclosure and the amply dimensioned power-train components, the entire system provides extreme stiffness.
High dynamic performance
Since the design is extremely compact, the moment of inertia is also very low. The servo motor offers high power and acceleration ratings as well as high overload capacity. Of special note, the torsionally stiffness connection to the screw nut allows very dynamic controller settings to be used.
Reduced design complexity
The ready-to-install unit consists of a servo motor, heavy duty bearing and multiturn absolute encoder and can be connected directly to a screw nut.
IP54 protection rating
With IP54 protection rating, these motors are also suitable for harsh environments.
Installation at any location
Fitted with sealed bearings, SPINDASYN units can be installed in any location. According to customer application, the bearings can also be re-lubricated.
Maintenance-free operation
Since SPINDASYN uses high-torque motors with sealed enclosures, they are practically maintenance-free and offer high availability. The integrated temperature sensors protect the motors against thermal overloading. Depending on the lifetime lubricated angular contact ball bearings and tapered roller bearings may have to be re-lubricated.
Heavy duty applications and high speeds
SPINDASYN hollow shaft motors are an efficient alternative to existing hydraulic solutions or linear drives in applications where high loads have to be moved at various different speeds.
Highest power density through liquid cooling (optional)
Liquid-cooled motors are compact in design and offer higher dynamic performance through less moving mass. Since the motors weigh less and are smaller in size, they are also easier to install.
技术数据
自定义选项
Bearing side of motor | Active component of motor | Motor end |
Normal duty bearing - Lubricated-for-life, normal duty bearing with continuous lubrication depending on application - Good acceleration characteristics - Support of high axial loads - For pushing and pulling forces - Seals on both sides of the bearing offer good protection against dirt - High stiffness and low friction - For dynamic applications for sizes SKT7, SKT10, and SKT13 | Convection-cooled - Various overall lengths for each size - Highly dynamic - High maximum torque - Smooth surface | Hollow through-shaft - No limits in screw stroke - Compact overall lengths - Multiturn absolute encoder - Optional hollow shaft brake |
Heavy duty bearing - For highest forces in sizes SKT10 and SKT13 - Lubricated-for-life heavy duty bearing with continuous lubrication depending on application - Support of highest axial loads - Especially suited for heavy duty screws - Static forces of up to 570 kN - Dynamic forces of up to 210 kN - High stiffness and low friction | Liquid-cooled - Various overall lengths for each size - Highly dynamic - High maximum torque - Smooth surface at the end - Increase in continuous torque for shorter cycle times - Cooling circuit made of stainless steel to protect against corrosion | Blind hollow shaft - Closed end of motor - Bleeding of trapped air via front end bell - Multiturn absolute encoder - Optional holding brake |